
40 Meter HDBaseT Extender with USB Extension
- HDMI 2.0(a/b)
- Ultra Slim Chassis
- USB 2.0 Up to 250Mbps support (Bi-Directional)
- USB Camera Support – UVC 1.5
- Audio Return Channel on HDMI or TOSLINK (ARC)
- 4K --> 1080P Down-scaling for mixed systems
- EDID Management and EDID emulate
- L/R Audio Extraction via Toslink
- HDCP 2.2 (and all earlier versions supported)
- 40M 4K (up to 4K60 4:4:4) (Cat6a)
AVPro Edge delivers stable HDMI distribution up to 40 meters, or 130 feet over standard category cable. Using HDBaseT technology we can pass taxing 4K signals directly alongside USB, control, and power signals all on the same cable. With HDMI running one way, and USB running the other, this becomes the ideal solution for connecting a smart/interactive board to a laptop or office computer.
HDMI cables have limitations to their lengths, trying to pass high bandwidth signals long distances can cause problems like video dropout or noise. Using the AVPro Edge extension products allow you to overcome these issues and install them with confidence.
Schools and conference rooms run smoothly and quickly with this device because it has 4K support. This product works with any display, monitor or projector it comes across, and with built in signal scaling, you are even able to support legacy displays that may have to be reused.
- Invisible Compression Technology: ICT is a revolution in HDMI extension technology. This proprietary technology can compress high bandwidth HDMI signals into a more manageable size to fit through a CAT Cable "pipe". The ICT algorithm can manage all flavors of HDR including 4:4:4, 4:2:2, and 4:2:0 as well as signals up to 18Gbps and 4K 60Hz 4:4:4. The architecture of ICT allows it to be compatible with all chroma subsampling types, color spaces and HDMI Deep Color up to 12 Bit. Our technology is unique because it is truly invisible. It is not only invisible to the human eye, it is invisible to HDMI test gear and other sink devices, what comes in is what goes out. What makes ICT special is that we preserve HDR Metadata and color information and depth in its full, original, integrity. Other compression technologies sacrifice these to save space and it will cause very visible banding, color shifting and motion artifacts in the image.
This technology is backed by extensive testing in side by side comparisons of ICT vs direct connected sources. The setup is two identical displays and a single source. The source is split and sent to both displays, one using ICT and one with an 18Gbps cable. The movie is shown in HDR and evaluators are brought into determine which one is compressed. The results are conclusive, it is invisible. Even to the most trained eye.
- Extend 4K 60 4:4:4 and HDR Signals: The length of manufactured HDMI cable is unchangeable after it is made and they are unreliable after about 25FT. Additionally, HDMI connectors can only be terminated in specialized factory environment due to its extremely high frequencies and high density. This does not allow installers or users to remake or make cables on a DIY basis. CAT-6A cables are available widely and can be reworked easily by the installer or end-user. Additionally, using CAT cable allows the user to change components as technology changes. By using AC-EX40-444-PLUS-KIT, the transmission distance for HD 1080P is up to 40 meters (130’) and UHD, 4K resolution the distance reaches an impressive 70 meters (230’).
- KVM (Keyboard Video Mouse): USB extension makes this unit a favored KVM solution. On the Transmitter device connect a USB A connection from a computer to the transmitter. That signal is carried along side the audio and video data on the category cable. On the receiver end you can connect your mouse or keyboard and control the computer 40 meters away. This is perfect for schools, contractors, drafting houses, constructions companies and more.
- Down Scaling: AC-EX40-444-PLUS-KIT has a scaling circuit built into the transmitter. The scaler can scale 4K (and HDR) --> 1080P. A common application for this is when you have a 4K distribution and you have one or two displays that are older. You can use the extender to scale down where you need to and not have to reduce the entire system. The AC-EX40-444-PLUS-KIT does the heavy lifting, eliminating the need to add additional boxes. This is an ideal choice for extension for projects requiring an 18G matrix like the AC-MX1616-AUHD.
- Total EDID Management: The AC-EX40-444-PLUS-KIT has robust EDID control. EDID management allows you to manage the input device and request specific video resolutions and/or audio codecs. the following EDID options are available:
- EDID Bypass
- 1080P 2CH Audio
- 1080P 8CH Audio
- 4K60 4:2:0 2CH Audio
- 4K60 4:2:0 8CH Audio
- 4K60 4:4:4 HDR 2CH Audio
- 4K60 4:4:4 HDR 8CH Audio
- USER EDID – EDID Copy
The EDID Copy Function allows you to copy and save from any display or projector you want to.
- Audio Return Channel (ARC): The Audio Return Channel in HDMI 1.4 and 2.0 enables a TV, via a single HDMI cable or Toslink, to send audio data “upstream” to an A/V receiver or surround audio controller, our extender will continue the upstream audio all the way to the Transmitter. There it can be connected via HDMI ARC or Toslink.
- On Board Troubleshooting: This unit allows you to generate a 1080P or 4K test pattern to identify external problems (source, repeater, displays, etc...). You can now be sure that your wiring is correct and get to the bottom of problemsquickly should they arise, without having to worrying if the source or sink is working properly. You can generate a test pattern from the Tx or the Rx so you can verify total system infrastructure integrity.
- Cascade: AC-EX40-444-PLUS-KIT features HDMI signal equalization and amplification. This allows for a “daisy chain” of AC-EX40-444-PLUS-KIT extenders for extremely long distance transmission. With our unique bi-directional power, there is no need for a power source where the Rx and Tx meet up in a daisy chain, simply power the first Tx and the second Rx and power will be provided to the middle remotely.
- IR & RS232 Management: IR & RS-232 are bidirectional and can control the sources from the sinks or vice versa. In addition you can use the I-PASS port to plug you Control System emitter ports directly into the IR (I-PASS) port on the transmitter (via mono 3.5mm cable) for clean and reliable IR pass through, our unique VPC (Voltage Protection Circuit) allows you to do this without wear and tear on the electronics inside.
- Invisible Compression Technology: ICT is a revolution in HDMI extension technology. This proprietary technology can compress high bandwidth HDMI signals into a more manageable size to fit through a CAT Cable "pipe". The ICT algorithm can manage all flavors of HDR including 4:4:4, 4:2:2, and 4:2:0 as well as signals up to 18Gbps and 4K 60Hz 4:4:4. The architecture of ICT allows it to be compatible with all chroma subsampling types, color spaces and HDMI Deep Color up to 12 Bit. Our technology is unique because it is truly invisible. It is not only invisible to the human eye, it is invisible to HDMI test gear and other sink devices, what comes in is what goes out. What makes ICT special is that we preserve HDR Metadata and color information and depth in its full, original, integrity. Other compression technologies sacrifice these to save space and it will cause very visible banding, color shifting and motion artifacts in the image.
- HDMI 2.0(a/b)
- USB 2.0 Up to 250Mbps support
- USB Extension (Selectable Host)
- USB Camera Support – UVC 1.5
- 4K60 4:4:4 Support
- HDR Support
- 4K --> 1080P Down-scaling for mixed systems
- Audio Return Channel on HDMI or TOSLINK (ARC)
- EDID Management and EDID emulate
- 4K & HD Test Patterns built into Tx and Rx for troubleshooting
- Audio Extraction via TOSLINK on Tx
- Audio Input via TOSLINK on Rx
- HDCP 2.2 (and all earlier versions supported)
- CEC Pass-Through
- 3D Support
- 70M (230ft) on 1080P (Cat6a)
- 40M (131ft) on 4K (Cat6a)
- Bi-directional 48v PoH (Power Over HDBaseT, only one Power Supply Needed)
- I-Pass Feature for control system "pass-through"
- 3-20v protection circuit built-in for safe IR transport
- Bi-Directional RS232 Transport
- LED Status, Link, Power indication lights
- Use single UTP/STP LAN cable (CAT-6A) with substitute HDMI cable to achieve long-distance transmission
- ESD protection circuitry (Inputs & Outputs) to 7KV
- Can Cascade
What's in the box?
- AC-EX40-444-PLUS-T (Transmitter)
- AC-EX40-444-PLUS-R (Receiver)
- 48V Power Supply (One supplied)
- 1 x IR Tx Unit
- 1 x IR Rx Unit
- 4x 3 Pin Terminal blocks for Audio and RS232 Ports
- Mounting Ears
Video: Video Resolutions Up to 4K 60Hz 4:4:4 VESA Resolutions Up to DCI 4K (4096x2160) HDR Formats/Resolutions 420, 422, 444 (10 and 12 Deep Color)
HDR10, HDR10+, Dolby Vision (24/30 Frames), HLGColor Space YUV (Component), RGB
(CSC: Rec. 601, Rec. 709, BT2020, DCI, P3 D6500)Chroma Subsampling 4:4:4, 4:2:2, 4:2:0 Supported Deep Color Up to 16 bit (1080), Up to 12 bit (4K) Down Scaling 4k (and HDR) down to 1080p Audio: Audio Formats Supported HDMI PCM 2.0 Ch, LPCM 5.1 & 7.1, Dolby Digtal, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS-X, Dolby Atmos Audio Formats Supported Extracted (Toslink) PCM 2 Ch, LPCM 6 Ch, LPCM 7 Ch, Dolby Digital, Dolby Digital Plus, DTS-HD Master Audio Distance: HDBaseT (CAT) Distance (4K) 40 Meters / 131 Feet (Cat 6a) HDBaseT (CAT) Distance (Full HD) 70 Meters / 230 Feet (Cat 6a) HDMI Lead In/Out (4K60 4:4:4) Up to 50 Feet (using Bullet Train HDMI) HDMI Lead In/Out (w/ AOC Cable) (4K60 4:4:4) Up to 130 Feet (using Bullet Train AOC) Other: Bandwidth 18 Gbps (Uses ICT above 10.2 Gbps signals) HDCP HDCP 2.2 and Earlier Other: Bandwidth 18 Gbps (W/ ICT) HDCP HDCP 2.2 and Earlier Ports: HDMI (TX & RX) Type A HDBaseT RJ45 w/ PoH for HDbaseT Receivers Extracted audio (TX ONLY, RX is an Audio INPUT) TOSLINK IR TX (TX & RX) 3.5MM Mono (2 Conductor) IR RX (tx & rx) 3.5mm Stereo (3 Conductor) rs232 (tx & rx) 3 Pin Terminal Block power (tx & rx) 2 Pin Terminal Block Ethernet (TX & RX) 4x RJ45 Connections (10/100) USB Selectable Host: Version USB 2.0 Tx Port USB Host = USB Type B (x2) USB Type A (x1) Rx Port USB Host = USB Type B (x2) USB Type A (x1) USB Camera Support UVC 1.5 Environmental: Operating Temprature 23 to 125°F (-5 to 51°C) Storage Temperature -4 to 140°F (-20 to 60°C) Humidity Range 5-90% RH (No Condensation) Power: Power Consumption (Total) 12 Watts Max Power Supply - Matrix Input: AC 100-240V ~ 50/60Hz
Output: DC 48V 0.5ADimensions: Dimensions (Single Unit Only, Height/Depth/Width) MM: 113.68 x 196.85 X 21.8
Inch: 4.48 X 7.75 X 0.86Dimensions (Kit Packaged, Height/Depth/Width) MM: 184.15 x 317.5 x 79.38
Inch: 7.25 x 12.5 x 3.125Weight (Single Unit) 1.2 lb (0.54 kg) Weight (Kit Packaged) 3.6 lbs (1.63 kg)